| Corky Bryant |
|
|
| #1 |
Howard, is it OK to plumb #8 inlet and only one #8 outlet at the regulator. If so whice P/N fitting do i need for the outlet side. I originally was going to plumb #8 in and two #6 out but have changed my mind. |
| |
| Howard |
|
|
| #2 |
Corky,
Sure, you can use a single -8 outlet.
The regulator fittings are a bit confusing. The early regulators had a 1/2"NPT inlet and 2-3/8"NPT outlets. Then we made about 500 with a -8AN inlet and 2 - -6AN outlet. The current regulators have a -8 AN inlet and 2 - -8AN outlets.
We have fittings for all of them under "Hose and Fittings" in the website.
Howard Stewart
|
| |
